The Perfect Crocs Fit

When it comes to choosing your size you will be glad to know we have done all the hard work for you! Crocs have a fit like no other shoe. They should fit very loosely, and the sides of your foot should not really touch the sides of the shoe. Your toes should never make contact with the front of the shoe. Some people and other websites may give you differing conversions for the size you should have, and therefore may have caused you some confusion. Here at LookAtMyCrazyShoes.com we have converted the Crocs sizes into your normal everyday UK and EU sizes. Therefore you should simply choose your normal shoe size when ordering. If you normally take a half size then we recommend that you go for the shoe size above. This is because your Crocs should fit very loosely, and you should always ensure your foot has enough space once inside. So, for example, if you are normally a size 5 ½ we recommend a size 6 when ordering any pair of Crocs. We recommend you always try on any Crocs you receive even if they don’t appear to be marked with the correct size.

Making Space

You should always ensure your foot has enough space once inside any Croc. Once you have centred your foot on the foot-bed you should have about a 1/4 to 1/2 inch of space in front of your toes and behind your heel. When you lift the strap you should be able to comfortably get your finger between the strap and heel. In other words the fit should be “loose”. We know that this goes against everything that you have ever been used to in a shoe, but these are the parameters that the shoe was designed to be worn under. No Pressure points Ever!

Strap Adjustments

To insure that the strap is not pulling your foot into the front of the shoe, rotate the strap forward and determine if your foot rests comfortably in the foot bed and there is room all around your foot. If so, you have the proper size but the strap is too short. To alleviate this issue, work your fingers around the strap and stretch it as you go around being careful not to put excessive pressure on the rivet hole. Stretch the strap until it is just short of the back edge of the shoe. The resin material has memory and will stay at the proper length after one or two of these types of adjustments.

Need help? Why not e-mail us or call us on : 0800 731 4885